One-dimensional (1D) spinel phase LiAl0.05Ni0.05Mn1.9O4 (LANMO) nanofibers are successfully assembled via an electrospinning precursor nanofiber followed by a tuned pro-oxidation heat treatment and calcine process. Decomposition process of polymer has great influence on the morphology and properties of precursor nanofibers, appropriate middle temperature (200-400 degrees C) heat treatment can form a relatively stable barrier between spinel crystallite and inhibit the recrystallization at higher temperature, resulting to a nanofiber consist of uniform fine particles. The resulting LANMO material exhibit superior electrochemical performance at high rate long cycle test (108 mAh g(-1) at 20 C rate after 1000 cycles, charge and discharge in same rate, room temperature) and good capacity retention at high temperature (73% capacity retention after 400 cycles at 10 C rate 55 degrees C). The improved high rate performance and long cycle stability can be attributed to the shortened lithium distribution path and sphericity-like particles resulting from the tuned pro-oxidation heat treatment. (C) 2017 Published by Elsevier B.V.